49,90 € *
Inhalt:
1 Stück
inkl. MwSt. zzgl. Versandkosten
Lagerartikel, ca. 1-3 Werktage
Lieferzeit innerhalb Deutschlands
- Artikel-Nr.: PM-6285
- Hersteller: Matek Systems
- Artikelname: CAN-L4-3100
- EAN: 4250902361853
Matek AP_PERIPH CAN RM3100 Kompass für Ardupilot AP Periph - CAN-L4-3100
CAN Node mit... mehr
Produktinformationen "Matek AP_PERIPH CAN RM3100 Kompass für Ardupilot AP Periph - CAN-L4-3100"
Matek AP_PERIPH CAN RM3100 Kompass für Ardupilot AP Periph - CAN-L4-3100
CAN Node mit RM3100 Kompass
Weitere Informationen finden Sie auch hier:
https://ardupilot.org/dev/docs/ap-peripheral-landing-page.html
Ausführliche Informationen und Technische Daten:
- CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
- RM3100 sensor technology provides high resolution, low power consumption, large signal noise immunity, a large dynamic range, and high sampling rates. Measurements are stable over temperature and inherently free from offset drift.
Specifications
- PNI RM3100 Geomagnetic Sensor
- CAN node MCU: STM32L431xC, 256KB Flash
- Interface
- CAN, DroneCAN Protocol
- UART2, MSP output (MatekL431-Periph fw)
- UART3, for external GNSS module
- ST debug, SWCLK & SWDIO
- LED
- Blue, Fast blinking, Booting
- Blue, Slow blinking, working
- Red, 3.3V indicator
- Power supply for CAN-L4-3100 board : 4.5~5.5V @5V pad/pin
- Power consumption: 22mA
- Operating Temperatures: -40~85 °C
- Physical
- Board Size: 36mm*25mm*10mm. 6g
- 3D File CAN-L4-3100_step.zip
- Firmware
- ArduPilot AP_Periph: MatekL431-GPS or MatekL431-Periph
- Update via DroneCAN GUI Tool or Mission Planner (AP_Periph.bin)
- Update via STLink (AP_Periph_with_bl.hex)
- Parameters
- CAN_P1_DRIVER = 1 if attached to CAN bus1 port or CAN_P2_DRIVER = 1 if attached to CAN bus2 port
- COMPASS_AUTODEC = 1
Packing
- 1x CAN-L4-3100 board
- 1x JST-GH-4P to JST-GH-4P 20cm silicon wire
Tips
- CAN-L4-3100 is pre-installed with “MatekL431-GPS” firmware.
- MSP feature is disabled in “MatekL431-GPS”. If you want to use MSP feature, reflash it with “MatekL431-Periph” firmware(AP_Periph_with_bl.hex) over SWC/SWD pads via ST-LINK.
- Put magnetometer far from power lines/ESC/motors/iron based material. >=10cm
- 2 ears for mounting can be cut off if you don’t need it.
- If the CAN wires are too long, bridge the “120R” jumper.
Weiterführende Links zu "Matek AP_PERIPH CAN RM3100 Kompass für Ardupilot AP Periph - CAN-L4-3100"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Matek AP_PERIPH CAN RM3100 Kompass für Ardupilot AP Periph - CAN-L4-3100"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
Derzeit Ausverkauft
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
Derzeit Ausverkauft
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar
- 5
Sofort lieferbar

Inhalt
1 Stück
529,90 €
*
559,90 €
*
- 4
Sofort lieferbar
- 4
Sofort lieferbar
Derzeit Ausverkauft
Derzeit Ausverkauft
Sofort lieferbar
Derzeit Ausverkauft
- 20
Sofort lieferbar

Inhalt
1 Stück
199,90 €
*
249,90 €
*
- 14
Sofort lieferbar
- 17
Sofort lieferbar
- 10
Sofort lieferbar
- 3
Sofort lieferbar

Inhalt
1 Stück
729,90 €
*
749,90 €
*
- 2
Sofort lieferbar

Inhalt
1 Stück
419,90 €
*
429,90 €
*
Sofort lieferbar
- 8
Sofort lieferbar
Sofort lieferbar
Derzeit Ausverkauft
Sofort lieferbar
Nur noch 1 auf Lager !
Sofort lieferbar
Sofort lieferbar
Derzeit Ausverkauft
- 2
Sofort lieferbar
Sofort lieferbar
Sofort lieferbar

Inhalt
1 Stück
24,90 €
*
Sofort lieferbar
Derzeit Ausverkauft
Derzeit Ausverkauft
Sofort lieferbar
Derzeit Ausverkauft
Zuletzt angesehen