Matek 3901-L0X Optical Flow und Lidar Sensor für INAV
Prices incl. VAT plus shipping costs
In Stock
Delivery time appr. 1-3 workdays within Germany
- Order number: PM-5507
- Hersteller: Matek Systems
- Artikelname: 3901-L0X
- EAN: 4250902354077
Matek 3901-L0X Optical Flow und Lidar Sensor für INAV
Geschwindigkeitssensor zur Nutzung mit Matek Flightcontrollern.
Setting up Optic Flow in INAV PDF manual by digitalentity
This module works with INAV firmware(2.2.x or latest) only
Specifications
- Optical Flow: PMW3901
- Lidar: VL53L0X
- Interface UART
- Protocol: INAV MSP
- Working Range: 8cm~200cm
- Field of view: 42 degree(PMW3901), 27 degree(VL53L0X)
- Minimum Illumination >60Lux
- Input voltage: 4.5~5.5V
- Power Consumption: 40mA
- Size: 36*12mm, 2g
Packing
- Module 3901-L0X, 1pc
Tips
- Make sure Optical Flow lens to ground >2cm for opflow initialization while FC starting up.
- Maximum range of VL53L0X is 2m, Altitude hold 0~2m @ throttle 0~100% if VL53L0X is enabled.
- Any unused UART of FC supports it
- Sonar connection (Trig & Echo) has not been implemented
- If your flight controller doesn’t have a barometer detected, you won’t be able to select “NAV ALTHOLD” in modes tab.
I have purchased this sen...
I have purchased this sensor several time and have been very pleased with it's operations and accuracy...
Kompakt, leicht und arbei...
Kompakt, leicht und arbeitet perfekt mit iNav zusammen.
Die Lieferung war sehr schnell.
Matek 3901-L0X Optical Fl...
Matek 3901-L0X Optical Flow and Lidar Sensor was installed on a Matek F405-STD with a Matek PDB and a Holybro Atlatl HV V2 5.8g VTX. EMAX 2306/2700kv motors and Makefire Blheli_32 35A ESC provided power with INAV firmware. Everthing worked fine. Position Hold, Surface and Return Home modes were greatly improved.
I have purchased this sen...
I have purchased this sensor several time and have been very pleased with it's operations and accuracy...
Kompakt, leicht und arbei...
Kompakt, leicht und arbeitet perfekt mit iNav zusammen.
Die Lieferung war sehr schnell.
Matek 3901-L0X Optical Fl...
Matek 3901-L0X Optical Flow and Lidar Sensor was installed on a Matek F405-STD with a Matek PDB and a Holybro Atlatl HV V2 5.8g VTX. EMAX 2306/2700kv motors and Makefire Blheli_32 35A ESC provided power with INAV firmware. Everthing worked fine. Position Hold, Surface and Return Home modes were greatly improved.
