Gremsy S1 V3 Gimbal Bundle - Flir Duo Pro R
inkl. MwSt. zzgl. Versandkosten
Versandkostenfreie Lieferung
innerhalb Deutschlands
Artikel wird auf Kundenwunsch produziert – Lieferzeit ca. 2 Wochen.
Bestellung wird direkt bei Liefereingang versendet
- Artikel-Nr.: PM-5760
- Hersteller: Gremsy
- Artikelname: Gremsy-S1-V3-Bundle Flir-DuoProR
- EAN: 4250902356606
Gremsy S1 V3 Gimbal Bundle - Flir Duo Pro R
Sehr hochwertiges S1 Gimbal von Gremsy in der Version 3.
Dieses Bundle ist für die FLIR Duo Pro R Kamera ausgelegt und enthält alles benötigte Zubehör zur Inbetriebnahme mit einem Pixhawk Flightcontroller.
Lieferumfang des Bundles:
Gremsy S1 V3 Gimbal
Damping Set
Flir Duo Pro R Control Cable
HDMI Adapter (Right to Straight, 20cm)
(Im Lieferumfang ist keine Kamera enthalten, die teilweise abgebildete Kameras dienen nur zu Demonstrationszwecken).
Infos zum Gimbal:
Integrated quick release. Extended pan rotation. Upgraded motor power.
Meet S1V3 - the most lightweight yet multi-load gimbal for mappers, surveyors and industry experts in any aerial missions.
HDMI HYPER QUICK RELEASE
-
HIGH-SPEED HDMI TRANSMISSION
The new quick-release having floating connectors not only allows quick assembly with many platforms but also ensures high-speed HDMI transmission after thousands of mating cycles.
-
HOT SWAP
Changing payloads on your drone in a matter of seconds.
With hot-swap capability on the quick release, it is easier than ever to swap out among Gremsy gimbals. S1V3, T3V3, T7)
20% INCREASE IN MOTOR POWER
Thanks to the built-in 14.5 Volt power regulator, the S1V3 comes with a 20% increase in motor power, strengthening the stability of your system even in harsh environments.
± 345° PAN ROTATION
More freedom to move. Better performance in the air.
Large pan rotation enables the best possible results in inspection or mapping missions.
YOUR DEVICE HUB
I/O ports including USB, Sbus, AUX, COM, HDMI, JR, POWER, CAN, USB have all been located on the quick release for easy and intuitive connection with external devices and third-party products.
CLEAN & SOLID DESIGN
No wires. No hassle. The clean and solid design ensures reliable and long-term operation for many applications.
FLEXIBILITY IN CAMERA MOUNTING
The crossbar is engineered with 2 slots for flexibly mounting your camera, whether large or small one.
CAMERA COMPATIBILITY
Wiris Pro
Wiris Security
Flir Duo Pro R
Wiris Pro
Sony A6000 series
Keii HL2-640
TeAx Fusion Zoom
-
MAPPING MODE
Gremsy S1 is a comprehensive solution for reliable aerial mapping and inspection applications specialized for a single operator.
Smart mapping mode allows customers to define the home position which will be aligned with the nose direction of the aircraft and tilted down 90 degrees.
- HDMI Hyper Quick Realease
- 20% Increase In Motor Power
- ± 345° Pan Rotation
- Your Device Hub
- Clean & Solid Design
- Flexibility In Camera Mounting
- Mapping Mode
Technische Daten:
Flir DUO Pro R
Flir DUO Pro
Flir DUO
Flir Vue Pro R
Flir Vue Pro
Flir Vue
Wiris Pro
Wiris Security
Wiris Agro R CWSI
Wiris Mini
TeAx Fusion
TeAx Fusion Zoom
Keii HL2-640
RED Edge
RED Edge M
Sony DSC-QX10
Sony DSC-QX30
BMMCC
Sony A5xxx Series
Sony A6xxx Series
Sony RX100 Series
- 1. Operation Modes
- Motor ON/OFF
- Lock mode
- Follow mode / Mapping mode
- Inverted mode
- 2. Temperature Sensor
- 3. Gremsy Specialized Gimbal Drive Motors with Encoders
- 4. Micro USB Connection
- 5. Gremsy Advanced 32-Bit high performance ARM microprocessor
- 6. S-Bus/Spektrum/PPM Receiver Supported
- Static current: 300mA/14.5V
- Dynamic current: 600mA/14.5V
- Locked motor current: 4A/14.5V
- 32° F ~ 122° F (0° C ~ 50° C)
- 1.8 lbs (830 g)
- Maximum depth from the center of gravity on camera base plate: 65mm
- Maximum height measured from top of camera base plate: 75mm
- Maximum width: 120mm
- 15-52V
- USB 2.0, CAN, UART, S-bus, Spektrum, PPM, Bluetooth
- Windows XP or above; Mac OS X 10.9 or above
- iOS 7.1 or above; Android 4.3 or above
- 1.6 lbs (750 g)
- ± 0.02°
- Pan axis: 180°/s
- Tilt axis: 180°/s
- Roll axis: 180°/s
- Pan axis control: ±345°
- Tilt axis control: +160° to -190°
- Roll axis control: +50° to -100°
- Pan axis control: ±345°
- Tilt axis control: ±120°
- Roll axis control: ± 45°
