€49.90 *
Content:
1 Stück
Prices incl. VAT plus shipping costs
In Stock
Delivery time appr. 1-3 workdays within Germany
- Order number: PM-6388
- Hersteller: Holybro
- Artikelname: 18089
- EAN: 4250902362881
Holybro Remote ID CAN + Serial Modul mit Gehäuse- 18089
Overview... more
Product information "Holybro Remote ID CAN + Serial Modul mit Gehäuse- 18089"
Holybro Remote ID CAN + Serial Modul mit Gehäuse- 18089
Overview
Holybro RemoteID Module is a low-cost, small-size, and light-weight module that broadcasts information about UAVs in flight through WiFi and Bluetooth. It supports both CAN and serial protocols. It is a FCC and CE-approved radio module.
The products run open-source firmware (ArduRemoteID) and provides a so-called standard Remote ID solution, primarily target drone manufacturers & system integrators.
Note: This product is designed for the Standard Remote ID Solution, primarily targeting drone manufacturers and system integrators, as you need to do your own approval process at the FAA (DoC submission) if you are in the USA. For the most accurate and latest information related to this topic, please refer to the official governance website of your country.
If you need customization or have special request, feel free to reach out to us via email.
If you need customization or have special request, feel free to reach out to us via email.
Specification
- Radio module:
- Firmware:
- ArduRemoteID (https://github.com/ArduPilot/ArduRemoteID).
- Supports upgrading firmware via the web interface (“OTA”)
- Supported in PX4 & Ardupilot (More Info)
- Protocol: CAN & Serial
- Interface:
- 1x JST GH 4-pin CAN (CAN) port
- 1x JST GH 6-pin TELEM (UART) port
- Antenna Connector type:
- On CNC Case: SMA connector
- On PCB: IPEX Connector
- Range: > 5km detection range*
- Power: 5V supplied from TELEM or CAN port
- LED lights: Bright RGB status LED
- Size:
- Without case: 35.3 x 23.5 mm (not including antenna)
- With CNC case: 38 x 26.5 x 11.5 mm (not including antenna)
- Mount: M2 screws
- Operating temperature: -40°C to +85°C
- Weight:
- PCB only: 4 g
- With CNC case & Antenna: 27.5g
- Without case & Antenna: 16.5g (Cable 20cm)
- Certification: FCC & CE
* The detection range depends on many factors such as the receiver antenna gain, transmission protocol, weather conditions, flying height, receiver height line of sight etc. With professional receivers a range of 5 km and more is possible.
Guides & Reference Link
- Holybro Doc
Related links to "Holybro Remote ID CAN + Serial Modul mit Gehäuse- 18089"
Read, write and discuss reviews... more
Customer evaluation for "Holybro Remote ID CAN + Serial Modul mit Gehäuse- 18089"
Write an evaluation
Evaluations will be activated after verification.
Only 4 left in Stock!
Item in Stock
Item in Stock
Only 4 left in Stock!
- 9
Only 3 left in Stock!
Temp. Sold Out
Item in Stock
Only 5 left in Stock!
Item in Stock
- 7
Only 3 left in Stock!
Here 4 Multiband RTK GNSS mit Neo-F9P L1/L5 GPS für Cube Orange HX4-06248
Content
1 Stück
€279.90
*
€299.90
*
Item in Stock
Holybro GPS Modul M10 2nd GPS für Cube Orange, Pixhawk 6C, 6X, uvm. - 12042
Content
1 Stück
€69.90
*
Item in Stock
Item in Stock
Item in Stock
Only 1 left in Stock!
Item in Stock
Item in Stock
Only 5 left in Stock!
- 10
Item in Stock
- 2
Item in Stock
- 8
Item in Stock
Preorder Available
Lead time approx. 2-4 weeks
Item in Stock
Only 1 left in Stock!
Item in Stock
Only 1 left in Stock!
- 4
Item in Stock
Free Shipping (D)
Pixhawk 2.1 - The Cube Orange Standard Set mit ADS-B Carrier Board
Content
1 Stück
€529.90
*
€549.90
*
Only 3 left in Stock!
Free Shipping (D)
- 14
Temp. Sold Out
Item in Stock
Free Shipping (D)
Item in Stock
Viewed