Prices incl. VAT plus shipping costs
In Stock
Delivery time appr. 1-3 workdays within Germany
- Order number: PM-7333
- Hersteller: TBS
- Artikelname: TBS-Lucid-AIO-50A
- EAN: 4250902366865
Product Description
The TBS Lucid Wing AIO 2-6S 50A is your quick plug & play wing FC for flying wings with up to 1m wingspan, or 1.5kg of takeoff weight (approximately). Running the STM32H7 chip, a custom AM32 50A ESC in a sleek, heat-dissipating plastic case with plug connectors for peripherals such as servos, VTx, Camera, GPS and external USB.
Designed for both seasoned pros and enthusiastic newcomers, this flight controller takes the chore out of building your FPV setup and gets you up and running quicker and easier.
Specification
| MCU | STM32H743VIH6 @ 480MHz, 1MB RAM, 2MB Flash |
| Gyro | ICM42688 x 2 (duo gyro) |
| OSD Chip | AT7456E (SPI2) |
| Barometer | Infineon DPS310 (I2C2) |
| PWM Outputs | 6 channels external, 1 internal (ESC) |
| Blackbox | MicroSD card slot (SDIO) |
| UARTs | 5 ext, 2 int (UART1 RX only / UART2 / UART3 / UART4 / UART6 / UART7 RX only internal ESC / UART8 internal) |
| I2C Buses | 2 (1x GPS, 1x barometer internal) |
| CAN Bus | 1x |
| ADC | 2 internal channels (VBAT, Current) |
| USB | Type-C (USB 2.0) |
| JST Connectors | 1x SH1.0 4-pin (Receiver), 3x SH1.0 6-pin (USB/GPS/VTX), 1x GH1.25 4-pin (CAN) |
| Servo Power | Filtered 5V / 6.2V / 7V / 8.4V (switchable) |
Power Specifications
| Input Voltage | 6–26V (2–6S LiPo) |
| BEC #1 | 5V / 6V / 7.2V 5A (Servos, digital VTX, analog VTX, analog camera) |
| BEC #2 | 5V 1A (Receiver, GPS, CAN bus) |
| Battery Voltage Sensor | 1K:20K (Scale 2100 in iNav, BATT_VOLT_MULT 21.0 in ArduPilot) |
| Current Sense ADC | 3.2V @ 160A |
| Power Consumption | 200mA @ 5V (Betaflight), 150mA @ 5V (ArduPilot) |
Firmware Targets
- ArduPilot: TBS_LUCID_H7_Wing
- iNav: TBS_LUCID_H7_WING_MINI
Includes
- TBS Lucid AIO Wing FC
- FC-to-USB board & cable
- FC-to-VTX cable
- DroneCAN Cable
- DJI O3 cable (plug & play)
Note
iNav firmware defaults may have different Mixer output settings than those intended for this AIO's internal connections. To ensure proper operation, users are encouraged to start with applying the TBS Chupito CLI, or adjust Timer Outputs manually: Timer 3 = SERVOS (S1 and S2), Timer 4 = MOTORS (S7).
DJI Switch: The DJI Switch will only output VBAT. Contact TBS support for instructions to fix.
Hersteller gemäß (GPSR (EU)2023/988)::
TBS Avionics Co Ltd (BR #1708099), 11/K Wing Shan Industrial Building, 428 CHA KWO LING ROAD, Yau Tong, Kowloon, Hong Kong SAR, China https://www.team-blacksheep.com/
Inverkehrbringer:
Premium-Modellbau Würch GmbH, Geschäftsführer: Steffen Würch, Torenstrasse 9, 88709 Meersburg, Deutschland, Tel: 07046 38795100, www.premium-modellbau.de