Product information "T-Motor Antigravity Brushless Motor MN2806 EVO 650kv"
• Maximum pull increased by 16%
• Efficiency improved by 0.3g/W at the same pull (over 400g)
• Upgraded to arc magnets and 220°C high-temperature wire
Detail information
Specifications
Hot Products
About T-MOTOR Antigravity MN2806 EVO KV650
T-MOTOR has advanced the Antigravity MN2806 to the latest Antigravity MN2806 EVO KV650, featuring arc-shaped magnets that tightly conform to the steel ring, effectively reducing the air gap with the stator. This design enhances the uniformity of magnetic flux distribution, minimizes magnetic leakage, and optimizes both magnetic field efficiency and motor performance. The enameled wire has been upgraded to withstand temperatures of up to 220℃, ensuring the motor maintains stability under extreme conditions, including high RPM, heavy loads, and elevated temperatures. This significantly reduces the risk of motor failures and damage due to wire breakage, thereby enhancing reliability and lifespan. The new Antigravity MN2806 EVO KV650 boasts a 16% increase in maximum thrust to 1390g, with an efficiency improvement of over 0.3g/W at similar thrust levels (above 400g).
Antigravity MN2806 EVO KV650 Highlights:
• Upgraded with arc-shaped magnets for optimal fit to the steel ring, precisely minimizing the stator air gap, optimizing magnetic flux distribution, and improving motor efficiency. • High-temperature resistant enameled wire rated for 220℃, reducing the likelihood of motor failures and enhancing reliability and longevity. • Maximum thrust increased by 16% to 1390g. • Efficiency improvement of over 0.3g/W at similar thrust levels (above 400g).
Packing List Includes:
- Package Dimensions: 85*71*35mm; - Antigravity MN2806 EVO KV650 motor ×1; - φ20*M6*26mm propeller mount ×1; - M6*1 bullet head ×1; - φ20*φ4*2.4mm cover plate ×1; - M3*5mm cup head hex screw ×4; - M3*8 cup head hex screw ×2;
higher force under the same pulling force of 400g+
16%
Greater pulling force
increased maximum pulling force
HIGHER TEMPERATURE-RESISTANT MATERIALS ARE USED
Technical Drawing
Specification
Motor Size
Φ34*26mm
Magnet Level
150℃ high temperature resistance
Stator
180℃ high temperature-resisting coatings
Lead
Enameled Wire 50mm
Configuration
12N14P
Copper Wire
220℃ high temperature resistance
Shaft Diameter
IN:4mm,OUT:4mm
Coil Insulation Test
500V
Bearing
Imported 694ZZ*2
Package Size
91*73*41mm
KV
650
Rated Voltage (LiPo)
4S
Idle Current(10V)
0.45A
ESC Recommendation
AIR40A 6S
Peak Current(180s)
16A
Propeller Recommendation
P12*4/P13*4.4
Max. Power(180s)
160W
Weight (Incl. Cable)
45g
Internal Resistance
201mΩ
Package Weight
105g
Test Data
Type
Propeller
Throttle
Voltage (V)
Thrust (g)
Torque (N*m)
Current (A)
RPM
Power (W)
Efficiency (g/W)
Operating Temperature (℃)
MN2806 EVO
P12
30%
16.04
161.96
0.03
0.69
2620
11.03
14.68
/
35%
16.03
214.53
0.04
0.99
2990
15.91
13.49
40%
16.02
288.66
0.05
1.49
3445
23.88
12.09
45%
16.01
358.77
0.06
2.04
3824
32.72
10.99
50%
16.00
431.93
0.07
2.65
4184
42.42
10.18
55%
15.99
510.53
0.08
3.38
4542
54.03
9.45
60%
15.97
593.18
0.10
4.19
4887
66.88
8.87
65%
15.95
680.02
0.11
5.16
5236
82.25
8.27
70%
15.93
766.48
0.12
6.19
5558
98.66
7.77
75%
15.91
854.42
0.14
7.31
5863
116.21
7.35
80%
15.88
947.68
0.15
8.57
6164
136.05
6.97
85%
15.86
1036.95
0.17
9.90
6448
157.02
6.60
90%
15.83
1126.54
0.18
11.32
6716
179.17
6.29
95%
15.80
1212.80
0.19
12.77
6958
201.86
6.01
100%
15.78
1275.96
0.20
13.95
7131
220.12
5.80
Note: Motor temperature is motor surface temperature at 100% throttle running 3mins. (Date above based on benchtest are for reference only, comparion with that of other motor types is not recommended.)
MN2806 EVO
P13
30%
16.04
186.98
0.03
0.78
2563
12.48
15.00
/
35%
16.03
247.73
0.04
1.15
2911
18.50
13.40
40%
16.02
335.22
0.06
1.75
3343
28.05
11.96
45%
16.00
419.61
0.07
2.40
3711
38.41
10.93
50%
15.99
501.17
0.08
3.08
4046
49.26
10.18
55%
15.97
591.89
0.10
3.97
4393
63.44
9.33
60%
15.96
678.03
0.11
4.85
4699
77.42
8.76
65%
15.94
775.62
0.13
5.93
5016
94.49
8.21
70%
15.91
867.18
0.14
7.06
5307
112.34
7.72
75%
15.89
961.47
0.16
8.33
5582
132.37
7.26
80%
15.86
1058.89
0.17
9.74
5845
154.44
6.86
85%
15.83
1153.05
0.19
11.20
6092
177.27
6.50
90%
15.80
1244.47
0.20
12.73
6320
201.21
6.18
95%
15.77
1332.54
0.22
14.30
6530
225.59
5.91
100%
15.75
1389.45
0.23
15.48
6679
243.81
5.70
Note: Motor temperature is motor surface temperature at 100% throttle running 3mins. (Date above based on benchtest are for reference only, comparion with that of other motor types is not recommended.)
Packing List
Related links to "T-Motor Antigravity Brushless Motor MN2806 EVO 650kv"
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.