Matek XT60-TVS Voltage Spike Filter XT60-TVS

Matek  XT60-TVS  Voltage Spike Filter  XT60-TVS

5x Voltage Spike Filter von Matek

XT60 und Kabel sind NICHT Teil des Lieferumfangs.

• 2x high-power TVS diodes and 1x 470uF low ESR capacitor on board
• TVS can absorb huge voltage surge at the moment of plugging battery to protect the connected components.
• Low ESR capacitor will reduce the voltage spikes and ripple caused by ESC.
• Maximum Operating Voltage: 28V (6S LiPo)
• Packing: 5x PCB w/TVS, 5x 470uF Rubycon ZLH series electrolytic capacitor.
•  

What is a TVS Diode and How Does it Work?

• The Transient Voltage Suppression diode (TVS) is a component that is commonly used for transient protection. (Not to be confused with zener diode or schottky diode.) It consists of a p-n semiconductor junction that becomes conductive during a transient voltage spike. In normal circumstances, it appears as an open circuit despite a small leakage current.
• When the voltage on the transient voltage suppressor rises across its threshold voltage(Breakdown Voltage), the avalanche effect of the semiconductor causes the p-n junction to become a low-impedance path that channels away the excessive current. The response time of the TVS diode is extremely fast, often expressed in picoseconds.
• The placement of the TVS diode is also important. It is a good practice to place TVS diodes as close to the power source as possible.